High Speed Max 30 Pcs SMT Cleaning Equipment SMT Nozzle Cleaner With Touch Screen
Introduce
The nozzle cleaning machine is a cleaning equipment that replaces the traditional use of steel needles or ultrasonic vibration to clean the nozzles. The dirt on the suction nozzle that could not be removed before can be removed in a short time. And the nozzle will not be damaged during the cleaning process. Since non-toxic and harmless cleaning fluid is used, the whole process is more environmentally friendly. With the development of SMT, miniaturization and high-density mounting of components have become a trend.
Advantage:
1. Reduce the purchase cost of nozzles
The scrapping of suction nozzles is often caused by excessive dirt or related accidents. After using this machine, the problem can be solved fundamentally. Original nozzles are expensive, mostly costing more than a thousand yuan. In the long run, the economic benefits are considerable.
2. Reduce unnecessary labor
The traditional cleaning method requires a lot of manual processing. After using the nozzle cleaning machine, there is no need for special personnel and it is all done by the machine.
3. Reduce the product defect rate. Dirty suction nozzles and weak suction can easily cause component sliding and material throwing, resulting in an increase in the product defect rate.
4. Improve SMT production efficiency
Correct cleaning keeps the nozzle working in a brand new state, avoiding identification errors and greatly improving production capacity.
Cleaning Principle
High-pressure jet technology: A, fine water mist particles, continuous pressure to reduce water, resulting in 3-10um particles of water mist to clean the dirt into the inner wall of the small nozzle aperture.
Pulsed power: B, Sound velocity (V=360m/s) forms a powerful pulsed power injection onto the nozzle, which can reach 30 pulse frequency per second, forming a continuous impact force above the nozzle to be cleaned. Smash the surface and internal dirt for cleaning purposes.
Specification
| Model | HS-800 |
| Voltage | Single phase, AC110-220V, 50H60Hz |
| Air pressure | 0.5~0.6Mpa |
| Air source | Pure compressor air |
| Control mode | PLC+Touch Screen |
| Jet pressure | ≤0.4MPa |
| Air wastage | Under 280NL/min |
| Water source | D.I water |
| Water storage | 800cc |
| Water consumption | 300cc/hrs |
| Admission pipe/Drainpipe | φ8/φ6 |
| Nozzle tray | Default 30 nozzles |
| Nozzle size | 01005, 0201-2512inch |
| Noise | 35-60dB |
Product Features
1, Elegant appearance, high precision 304 stainless steel machine body.
2, Max can clean 30 pcs nozzles at one time, achieve high efficiency and energy saving.
3, Suitable for cleaning all kinds of nozzles, also have good cleaning performance for cross type, I-shaped, and special shape nozzles.
4, The atomized water flow equipped with supersonic spraying cleaning to completely clean the dirt impurities which the ultrasonic waves can not clean it all, ensure the clearness even very small nozzle holes.
5, Easy operation, English is available.
6, Inspection window which can watch the whole cleaning process.
7, Using D.I water as cleaning solvent,not harmful for all types of nozzles and reflector panel.
8, Touch screen + PLC distributed control, stable and reliable performance
Machine size
Nozzle Tray
|
|
High Speed Max 30 Pcs SMT Cleaning Equipment SMT Nozzle Cleaner With Touch Screen Images
|
